freqtrade_origin/docs/hyperopt.md

460 lines
22 KiB
Markdown
Raw Normal View History

# Hyperopt
2018-12-30 16:17:52 +00:00
This page explains how to tune your strategy by finding the optimal
parameters, a process called hyperparameter optimization. The bot uses several
2018-07-03 09:43:25 +00:00
algorithms included in the `scikit-optimize` package to accomplish this. The
2018-07-02 06:56:58 +00:00
search will burn all your CPU cores, make your laptop sound like a fighter jet
and still take a long time.
2019-09-21 08:09:14 +00:00
Hyperopt requires historic data to be available, just as backtesting does.
To learn how to get data for the pairs and exchange you're interrested in, head over to the [Data Downloading](data-download.md) section of the documentation.
2019-09-21 08:09:14 +00:00
2018-12-30 16:17:52 +00:00
!!! Bug
Hyperopt can crash when used with only 1 CPU Core as found out in [Issue #1133](https://github.com/freqtrade/freqtrade/issues/1133)
2018-07-02 06:56:58 +00:00
## Prepare Hyperopting
Before we start digging into Hyperopt, we recommend you to take a look at
the sample hyperopt file located in [user_data/hyperopts/](https://github.com/freqtrade/freqtrade/blob/develop/user_data/hyperopts/sample_hyperopt.py).
2018-03-31 05:49:06 +00:00
Configuring hyperopt is similar to writing your own strategy, and many tasks will be similar and a lot of code can be copied across from the strategy.
2019-01-06 13:47:53 +00:00
### Checklist on all tasks / possibilities in hyperopt
Depending on the space you want to optimize, only some of the below are required:
2019-01-06 13:47:53 +00:00
* fill `populate_indicators` - probably a copy from your strategy
* fill `buy_strategy_generator` - for buy signal optimization
* fill `indicator_space` - for buy signal optimzation
* fill `sell_strategy_generator` - for sell signal optimization
* fill `sell_indicator_space` - for sell signal optimzation
Optional, but recommended:
* copy `populate_buy_trend` from your strategy - otherwise default-strategy will be used
* copy `populate_sell_trend` from your strategy - otherwise default-strategy will be used
Rarely you may also need to override:
* `roi_space` - for custom ROI optimization (if you need the ranges for the ROI parameters in the optimization hyperspace that differ from default)
* `generate_roi_table` - for custom ROI optimization (if you need more than 4 entries in the ROI table)
* `stoploss_space` - for custom stoploss optimization (if you need the range for the stoploss parameter in the optimization hyperspace that differs from default)
2019-01-06 13:47:53 +00:00
2018-03-31 05:49:06 +00:00
### 1. Install a Custom Hyperopt File
Put your hyperopt file into the directory `user_data/hyperopts`.
2018-12-30 16:17:52 +00:00
Let assume you want a hyperopt file `awesome_hyperopt.py`:
Copy the file `user_data/hyperopts/sample_hyperopt.py` into `user_data/hyperopts/awesome_hyperopt.py`
2018-03-31 05:49:06 +00:00
### 2. Configure your Guards and Triggers
There are two places you need to change in your hyperopt file to add a new buy hyperopt for testing:
- Inside `indicator_space()` - the parameters hyperopt shall be optimizing.
- Inside `populate_buy_trend()` - applying the parameters.
2018-03-22 10:07:22 +00:00
2018-11-20 16:36:17 +00:00
There you have two different types of indicators: 1. `guards` and 2. `triggers`.
2018-03-22 10:07:22 +00:00
1. Guards are conditions like "never buy if ADX < 10", or never buy if current price is over EMA10.
2. Triggers are ones that actually trigger buy in specific moment, like "buy when EMA5 crosses over EMA10" or "buy when close price touches lower bollinger band".
2018-12-30 16:17:52 +00:00
Hyperoptimization will, for each eval round, pick one trigger and possibly
multiple guards. The constructed strategy will be something like
"*buy exactly when close price touches lower bollinger band, BUT only if
ADX > 10*".
If you have updated the buy strategy, i.e. changed the contents of
`populate_buy_trend()` method, you have to update the `guards` and
`triggers` your hyperopt must use correspondingly.
#### Sell optimization
2019-04-04 19:05:26 +00:00
Similar to the buy-signal above, sell-signals can also be optimized.
Place the corresponding settings into the following methods
2019-01-06 13:47:53 +00:00
* Inside `sell_indicator_space()` - the parameters hyperopt shall be optimizing.
* Inside `populate_sell_trend()` - applying the parameters.
The configuration and rules are the same than for buy signals.
2019-01-06 13:47:53 +00:00
To avoid naming collisions in the search-space, please prefix all sell-spaces with `sell-`.
#### Using ticker-interval as part of the Strategy
The Strategy exposes the ticker-interval as `self.ticker_interval`. The same value is available as class-attribute `HyperoptName.ticker_interval`.
In the case of the linked sample-value this would be `SampleHyperOpt.ticker_interval`.
2018-07-02 06:56:58 +00:00
## Solving a Mystery
2018-12-30 16:17:52 +00:00
Let's say you are curious: should you use MACD crossings or lower Bollinger
Bands to trigger your buys. And you also wonder should you use RSI or ADX to
help with those buy decisions. If you decide to use RSI or ADX, which values
should I use for them? So let's use hyperparameter optimization to solve this
2018-07-02 06:56:58 +00:00
mystery.
2018-07-02 06:56:58 +00:00
We will start by defining a search space:
2019-01-06 13:47:53 +00:00
```python
2018-07-02 06:56:58 +00:00
def indicator_space() -> List[Dimension]:
"""
Define your Hyperopt space for searching strategy parameters
"""
return [
Integer(20, 40, name='adx-value'),
Integer(20, 40, name='rsi-value'),
Categorical([True, False], name='adx-enabled'),
Categorical([True, False], name='rsi-enabled'),
Categorical(['bb_lower', 'macd_cross_signal'], name='trigger')
]
```
2018-12-30 16:17:52 +00:00
Above definition says: I have five parameters I want you to randomly combine
to find the best combination. Two of them are integer values (`adx-value`
2018-07-02 06:56:58 +00:00
and `rsi-value`) and I want you test in the range of values 20 to 40.
Then we have three category variables. First two are either `True` or `False`.
We use these to either enable or disable the ADX and RSI guards. The last
one we call `trigger` and use it to decide which buy trigger we want to use.
So let's write the buy strategy using these values:
2019-01-06 13:47:53 +00:00
``` python
2018-07-02 06:56:58 +00:00
def populate_buy_trend(dataframe: DataFrame) -> DataFrame:
conditions = []
# GUARDS AND TRENDS
if 'adx-enabled' in params and params['adx-enabled']:
conditions.append(dataframe['adx'] > params['adx-value'])
if 'rsi-enabled' in params and params['rsi-enabled']:
conditions.append(dataframe['rsi'] < params['rsi-value'])
# TRIGGERS
2019-01-06 09:30:58 +00:00
if 'trigger' in params:
if params['trigger'] == 'bb_lower':
conditions.append(dataframe['close'] < dataframe['bb_lowerband'])
if params['trigger'] == 'macd_cross_signal':
conditions.append(qtpylib.crossed_above(
dataframe['macd'], dataframe['macdsignal']
))
2018-07-02 06:56:58 +00:00
2019-05-24 20:08:56 +00:00
if conditions:
dataframe.loc[
reduce(lambda x, y: x & y, conditions),
'buy'] = 1
2018-07-02 06:56:58 +00:00
return dataframe
return populate_buy_trend
```
2018-07-02 06:56:58 +00:00
Hyperopting will now call this `populate_buy_trend` as many times you ask it (`epochs`)
with different value combinations. It will then use the given historical data and make
buys based on the buy signals generated with the above function and based on the results
it will end with telling you which paramter combination produced the best profits.
2018-12-30 16:17:52 +00:00
The search for best parameters starts with a few random combinations and then uses a
2018-07-03 09:43:25 +00:00
regressor algorithm (currently ExtraTreesRegressor) to quickly find a parameter combination
2019-07-18 18:02:28 +00:00
that minimizes the value of the [loss function](#loss-functions).
2018-07-03 09:43:25 +00:00
The above setup expects to find ADX, RSI and Bollinger Bands in the populated indicators.
2018-12-30 16:17:52 +00:00
When you want to test an indicator that isn't used by the bot currently, remember to
2018-07-03 09:43:25 +00:00
add it to the `populate_indicators()` method in `hyperopt.py`.
2019-07-15 20:52:33 +00:00
## Loss-functions
2019-07-18 18:02:28 +00:00
Each hyperparameter tuning requires a target. This is usually defined as a loss function (sometimes also called objective function), which should decrease for more desirable results, and increase for bad results.
2019-07-15 20:52:33 +00:00
2019-07-18 18:02:28 +00:00
By default, FreqTrade uses a loss function, which has been with freqtrade since the beginning and optimizes mostly for short trade duration and avoiding losses.
2019-07-15 20:52:33 +00:00
2019-07-25 18:06:41 +00:00
A different loss function can be specified by using the `--hyperopt-loss <Class-name>` argument.
This class should be in its own file within the `user_data/hyperopts/` directory.
2019-07-15 20:52:33 +00:00
2019-08-12 04:45:27 +00:00
Currently, the following loss functions are builtin:
* `DefaultHyperOptLoss` (default legacy Freqtrade hyperoptimization loss function)
* `OnlyProfitHyperOptLoss` (which takes only amount of profit into consideration)
* `SharpeHyperOptLoss` (optimizes Sharpe Ratio calculated on the trade returns)
2019-07-15 19:36:01 +00:00
2019-07-18 18:02:28 +00:00
### Creating and using a custom loss function
To use a custom loss function class, make sure that the function `hyperopt_loss_function` is defined in your custom hyperopt loss class.
For the sample below, you then need to add the command line parameter `--hyperopt-loss SuperDuperHyperOptLoss` to your hyperopt call so this fuction is being used.
2019-07-15 19:36:01 +00:00
A sample of this can be found below, which is identical to the Default Hyperopt loss implementation. A full sample can be found [user_data/hyperopts/](https://github.com/freqtrade/freqtrade/blob/develop/user_data/hyperopts/sample_hyperopt_loss.py)
2019-07-15 19:36:01 +00:00
``` python
from freqtrade.optimize.hyperopt import IHyperOptLoss
2019-07-16 04:27:23 +00:00
TARGET_TRADES = 600
EXPECTED_MAX_PROFIT = 3.0
MAX_ACCEPTED_TRADE_DURATION = 300
class SuperDuperHyperOptLoss(IHyperOptLoss):
"""
Defines the default loss function for hyperopt
"""
2019-07-15 19:36:01 +00:00
@staticmethod
2019-07-16 04:27:23 +00:00
def hyperopt_loss_function(results: DataFrame, trade_count: int,
min_date: datetime, max_date: datetime,
*args, **kwargs) -> float:
2019-07-15 19:36:01 +00:00
"""
2019-07-16 04:27:23 +00:00
Objective function, returns smaller number for better results
This is the legacy algorithm (used until now in freqtrade).
Weights are distributed as follows:
* 0.4 to trade duration
* 0.25: Avoiding trade loss
2019-07-17 04:32:24 +00:00
* 1.0 to total profit, compared to the expected value (`EXPECTED_MAX_PROFIT`) defined above
2019-07-15 19:36:01 +00:00
"""
total_profit = results.profit_percent.sum()
trade_duration = results.trade_duration.mean()
trade_loss = 1 - 0.25 * exp(-(trade_count - TARGET_TRADES) ** 2 / 10 ** 5.8)
profit_loss = max(0, 1 - total_profit / EXPECTED_MAX_PROFIT)
duration_loss = 0.4 * min(trade_duration / MAX_ACCEPTED_TRADE_DURATION, 1)
result = trade_loss + profit_loss + duration_loss
return result
```
Currently, the arguments are:
* `results`: DataFrame containing the result
2019-07-16 17:40:42 +00:00
The following columns are available in results (corresponds to the output-file of backtesting when used with `--export trades`):
`pair, profit_percent, profit_abs, open_time, close_time, open_index, close_index, trade_duration, open_at_end, open_rate, close_rate, sell_reason`
2019-07-15 19:36:01 +00:00
* `trade_count`: Amount of trades (identical to `len(results)`)
* `min_date`: Start date of the hyperopting TimeFrame
* `min_date`: End date of the hyperopting TimeFrame
2019-07-18 18:02:28 +00:00
This function needs to return a floating point number (`float`). Smaller numbers will be interpreted as better results. The parameters and balancing for this is up to you.
2019-07-15 19:36:01 +00:00
!!! Note
2019-07-16 03:41:39 +00:00
This function is called once per iteration - so please make sure to have this as optimized as possible to not slow hyperopt down unnecessarily.
2019-07-15 19:36:01 +00:00
!!! Note
2019-07-16 03:41:39 +00:00
Please keep the arguments `*args` and `**kwargs` in the interface to allow us to extend this interface later.
2019-07-15 19:36:01 +00:00
## Execute Hyperopt
Once you have updated your hyperopt configuration you can run it.
2019-07-18 18:02:28 +00:00
Because hyperopt tries a lot of combinations to find the best parameters it will take time to get a good result. More time usually results in better results.
We strongly recommend to use `screen` or `tmux` to prevent any connection loss.
```bash
freqtrade -c config.json hyperopt --customhyperopt <hyperoptname> -e 5000 --spaces all
```
Use `<hyperoptname>` as the name of the custom hyperopt used.
2018-03-22 10:07:22 +00:00
The `-e` flag will set how many evaluations hyperopt will do. We recommend
running at least several thousand evaluations.
2019-01-06 13:47:53 +00:00
The `--spaces all` flag determines that all possible parameters should be optimized. Possibilities are listed below.
2019-07-18 18:02:28 +00:00
!!! Note
By default, hyperopt will erase previous results and start from scratch. Continuation can be archived by using `--continue`.
2019-01-06 13:47:53 +00:00
!!! Warning
2019-07-18 18:02:28 +00:00
When switching parameters or changing configuration options, make sure to not use the argument `--continue` so temporary results can be removed.
2019-01-06 13:47:53 +00:00
2018-07-02 06:56:58 +00:00
### Execute Hyperopt with Different Ticker-Data Source
If you would like to hyperopt parameters using an alternate ticker data that
2018-01-18 07:06:37 +00:00
you have on-disk, use the `--datadir PATH` option. Default hyperopt will
use data from directory `user_data/data`.
2018-01-07 09:15:26 +00:00
2018-07-02 06:56:58 +00:00
### Running Hyperopt with Smaller Testset
2019-07-18 18:02:28 +00:00
Use the `--timerange` argument to change how much of the testset you want to use.
For example, to use one month of data, pass the following parameter to the hyperopt call:
2018-01-10 23:14:36 +00:00
```bash
2019-07-18 18:02:28 +00:00
freqtrade hyperopt --timerange 20180401-20180501
2018-01-10 23:14:36 +00:00
```
2018-07-02 06:56:58 +00:00
### Running Hyperopt with Smaller Search Space
Use the `--spaces` argument to limit the search space used by hyperopt.
2018-12-30 16:17:52 +00:00
Letting Hyperopt optimize everything is a huuuuge search space. Often it
might make more sense to start by just searching for initial buy algorithm.
Or maybe you just want to optimize your stoploss or roi table for that awesome
new buy strategy you have.
Legal values are:
2019-07-15 19:36:01 +00:00
* `all`: optimize everything
* `buy`: just search for a new buy strategy
* `sell`: just search for a new sell strategy
* `roi`: just optimize the minimal profit table for your strategy
* `stoploss`: search for the best stoploss value
* space-separated list of any of the above values for example `--spaces roi stoploss`
2019-07-15 19:36:01 +00:00
### Position stacking and disabling max market positions
In some situations, you may need to run Hyperopt (and Backtesting) with the
`--eps`/`--enable-position-staking` and `--dmmp`/`--disable-max-market-positions` arguments.
By default, hyperopt emulates the behavior of the Freqtrade Live Run/Dry Run, where only one
open trade is allowed for every traded pair. The total number of trades open for all pairs
is also limited by the `max_open_trades` setting. During Hyperopt/Backtesting this may lead to
some potential trades to be hidden (or masked) by previosly open trades.
The `--eps`/`--enable-position-stacking` argument allows emulation of buying the same pair multiple times,
while `--dmmp`/`--disable-max-market-positions` disables applying `max_open_trades`
2019-07-15 04:59:20 +00:00
during Hyperopt/Backtesting (which is equal to setting `max_open_trades` to a very high
number).
!!! Note
Dry/live runs will **NOT** use position stacking - therefore it does make sense to also validate the strategy without this as it's closer to reality.
You can also enable position stacking in the configuration file by explicitly setting
`"position_stacking"=true`.
## Understand the Hyperopt Result
2018-07-03 09:43:25 +00:00
Once Hyperopt is completed you can use the result to create a new strategy.
Given the following result from hyperopt:
2018-07-02 06:56:58 +00:00
```
2018-07-02 06:56:58 +00:00
Best result:
2019-08-03 08:05:05 +00:00
2019-08-02 19:23:48 +00:00
44/100: 135 trades. Avg profit 0.57%. Total profit 0.03871918 BTC (0.7722Σ%). Avg duration 180.4 mins. Objective: 1.94367
2019-08-03 08:05:05 +00:00
2019-08-02 19:23:48 +00:00
Buy hyperspace params:
2019-01-06 13:47:53 +00:00
{ 'adx-value': 44,
'rsi-value': 29,
'adx-enabled': False,
'rsi-enabled': True,
'trigger': 'bb_lower'}
```
You should understand this result like:
2018-07-02 06:56:58 +00:00
- The buy trigger that worked best was `bb_lower`.
2018-12-30 16:17:52 +00:00
- You should not use ADX because `adx-enabled: False`)
2018-07-02 06:56:58 +00:00
- You should **consider** using the RSI indicator (`rsi-enabled: True` and the best value is `29.0` (`rsi-value: 29.0`)
2018-12-30 16:17:52 +00:00
You have to look inside your strategy file into `buy_strategy_generator()`
method, what those values match to.
2018-12-30 16:17:52 +00:00
So for example you had `rsi-value: 29.0` so we would look at `rsi`-block, that translates to the following code block:
2019-07-18 18:02:28 +00:00
``` python
2018-07-02 06:56:58 +00:00
(dataframe['rsi'] < 29.0)
```
2018-12-30 16:17:52 +00:00
Translating your whole hyperopt result as the new buy-signal
2018-07-02 06:56:58 +00:00
would then look like:
```python
2018-01-18 07:06:37 +00:00
def populate_buy_trend(self, dataframe: DataFrame) -> DataFrame:
dataframe.loc[
(
2018-07-02 06:56:58 +00:00
(dataframe['rsi'] < 29.0) & # rsi-value
dataframe['close'] < dataframe['bb_lowerband'] # trigger
),
'buy'] = 1
return dataframe
```
By default, hyperopt prints colorized results -- epochs with positive profit are printed in the green color. This highlighting helps you find epochs that can be interesting for later analysis. Epochs with zero total profit or with negative profits (losses) are printed in the normal color. If you do not need colorization of results (for instance, when you are redirecting hyperopt output to a file) you can switch colorization off by specifying the `--no-color` option in the command line.
2019-08-03 16:09:42 +00:00
You can use the `--print-all` command line option if you would like to see all results in the hyperopt output, not only the best ones. When `--print-all` is used, current best results are also colorized by default -- they are printed in bold (bright) style. This can also be switched off with the `--no-color` command line option.
2019-08-03 16:09:42 +00:00
### Understand Hyperopt ROI results
2019-08-09 06:31:30 +00:00
If you are optimizing ROI (i.e. if optimization search-space contains 'all' or 'roi'), your result will look as follows and include a ROI table:
```
Best result:
2019-08-03 08:05:05 +00:00
2019-08-02 19:23:48 +00:00
44/100: 135 trades. Avg profit 0.57%. Total profit 0.03871918 BTC (0.7722Σ%). Avg duration 180.4 mins. Objective: 1.94367
2019-08-03 08:05:05 +00:00
2019-08-02 19:23:48 +00:00
Buy hyperspace params:
2019-01-06 13:47:53 +00:00
{ 'adx-value': 44,
'rsi-value': 29,
2019-08-02 19:23:48 +00:00
'adx-enabled': False,
2019-01-06 13:47:53 +00:00
'rsi-enabled': True,
2019-08-02 19:23:48 +00:00
'trigger': 'bb_lower'}
ROI table:
2019-09-28 08:56:19 +00:00
{ 0: 0.10674,
21: 0.09158,
78: 0.03634,
2019-01-06 13:47:53 +00:00
118: 0}
```
2019-09-28 21:43:27 +00:00
In order to use this best ROI table found by Hyperopt in backtesting and for live trades/dry-run, copy-paste it as the value of the `minimal_roi` attribute of your custom strategy:
```
# Minimal ROI designed for the strategy.
# This attribute will be overridden if the config file contains "minimal_roi"
minimal_roi = {
0: 0.10674,
21: 0.09158,
78: 0.03634,
118: 0
}
```
As stated in the comment, you can also use it as the value of the `minimal_roi` setting in the configuration file.
#### Default ROI Search Space
If you are optimizing ROI, Freqtrade creates the 'roi' optimization hyperspace for you -- it's the hyperspace of components for the ROI tables. By default, each ROI table generated by the Freqtrade consists of 4 rows (steps). Hyperopt implements adaptive ranges for ROI tables with ranges for values in the ROI steps that depend on the ticker_interval used. By default the values can vary in the following ranges (for some of the most used ticker intervals, values are rounded to 5 digits after the decimal point):
2019-09-06 08:55:07 +00:00
| # step | 1m | | 5m | | 1h | | 1d | |
|---|---|---|---|---|---|---|---|---|
| 1 | 0 | 0.01161...0.11992 | 0 | 0.03...0.31 | 0 | 0.06883...0.71124 | 0 | 0.12178...1.25835 |
| 2 | 2...8 | 0.00774...0.04255 | 10...40 | 0.02...0.11 | 120...480 | 0.04589...0.25238 | 2880...11520 | 0.08118...0.44651 |
| 3 | 4...20 | 0.00387...0.01547 | 20...100 | 0.01...0.04 | 240...1200 | 0.02294...0.09177 | 5760...28800 | 0.04059...0.16237 |
| 4 | 6...44 | 0.0 | 30...220 | 0.0 | 360...2640 | 0.0 | 8640...63360 | 0.0 |
These ranges should be sufficient in most cases. The minutes in the steps (ROI dict keys) are scaled linearly depending on the ticker interval used. The ROI values in the steps (ROI dict values) are scaled logarithmically depending on the ticker interval used.
2019-09-05 20:31:07 +00:00
If you have the `generate_roi_table()` and `roi_space()` methods in your custom hyperopt file, remove them in order to utilize these adaptive ROI tables and the ROI hyperoptimization space generated by Freqtrade by default.
2019-09-05 20:31:07 +00:00
Override the `roi_space()` method if you need components of the ROI tables to vary in other ranges. Override the `generate_roi_table()` and `roi_space()` methods and implement your own custom approach for generation of the ROI tables during hyperoptimization if you need a different structure of the ROI tables or other amount of rows (steps). A sample for these methods can be found in [user_data/hyperopts/sample_hyperopt_advanced.py](https://github.com/freqtrade/freqtrade/blob/develop/user_data/hyperopts/sample_hyperopt_advanced.py).
### Understand Hyperopt Stoploss results
2019-08-09 06:31:30 +00:00
If you are optimizing stoploss values (i.e. if optimization search-space contains 'all' or 'stoploss'), your result will look as follows and include stoploss:
```
Best result:
44/100: 135 trades. Avg profit 0.57%. Total profit 0.03871918 BTC (0.7722Σ%). Avg duration 180.4 mins. Objective: 1.94367
Buy hyperspace params:
{ 'adx-value': 44,
'rsi-value': 29,
'adx-enabled': False,
'rsi-enabled': True,
'trigger': 'bb_lower'}
2019-09-28 08:54:26 +00:00
Stoploss: -0.27996
```
2019-09-28 21:43:27 +00:00
In order to use this best stoploss value found by Hyperopt in backtesting and for live trades/dry-run, copy-paste it as the value of the `stoploss` attribute of your custom strategy:
```
# Optimal stoploss designed for the strategy
# This attribute will be overridden if the config file contains "stoploss"
stoploss = -0.27996
```
As stated in the comment, you can also use it as the value of the `stoploss` setting in the configuration file.
#### Default Stoploss Search Space
2019-09-28 08:50:15 +00:00
If you are optimizing stoploss values, Freqtrade creates the 'stoploss' optimization hyperspace for you. By default, the stoploss values in that hyperspace can vary in the range -0.35...-0.02, which is sufficient in most cases.
2019-09-05 20:31:07 +00:00
If you have the `stoploss_space()` method in your custom hyperopt file, remove it in order to utilize Stoploss hyperoptimization space generated by Freqtrade by default.
2019-09-05 20:31:07 +00:00
Override the `stoploss_space()` method and define the desired range in it if you need stoploss values to vary in other range during hyperoptimization. A sample for this method can be found in [user_data/hyperopts/sample_hyperopt_advanced.py](https://github.com/freqtrade/freqtrade/blob/develop/user_data/hyperopts/sample_hyperopt_advanced.py).
### Validate backtesting results
Once the optimized strategy has been implemented into your strategy, you should backtest this strategy to make sure everything is working as expected.
To achieve same results (number of trades, their durations, profit, etc.) than during Hyperopt, please use same set of arguments `--dmmp`/`--disable-max-market-positions` and `--eps`/`--enable-position-stacking` for Backtesting.
2018-07-02 06:56:58 +00:00
## Next Step
Now you have a perfect bot and want to control it from Telegram. Your
2018-12-31 12:39:18 +00:00
next step is to learn the [Telegram usage](telegram-usage.md).